Stihl FS 411 C-EM Professional Rated-Petrol Powered-Clearing Saw

£1,080.00
Title
-
+
£865.00

Petrol Grass trimmer/BrushcutterStihlIf you need a powerful machine for mowing tough areas of grass and brush then its the Stihl FS 411 C-EM for you. With its large cutting diameter and optimised gear ratio. Improved mowing performance. New to the range this year the technically enhanced gearbox includes updates to the sealing system, main bearing and lubricant circulation - meaning increased robustness and a long service life. New deflector design makes storage easier and increases visibility of the cutting attachment whilst working. Reduced vibration levels during partial load operation. STIHL 4-point anti-vibration system, STIHL ErgoStart,multi-function handle, bike handle, tool-free handle adjustment, STIHL 2-MIX engine, STIHL M-Tronic, with ADVANCE universal harness and AutoCut 46-2 mowing  head.  

 

 

STIHL M-Tronic

This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again

STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.  

STIHL 4-point anti-vibration system

In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)

Simplified starting system

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Technical data Value
Performance PS 2.7
Performance kW 2
CO² ­ g/kWh 840
Vibration value, left with mowing head m/s2 1) 1.9
Sound pressure level with metal tool dB(A) 2) 99
Vibration value, right with metal tool m/s2 1) 2.4
Total length cm 3) 179
Capacity cm3 41.6
Vibration value, right with mowing head m/s2 1) 2.3
Vibration value, left with metal tool m/s2 1) 2.6
Sound pressure level with mowing head dB(A) 2) 100
Tank volume l 0.75
Weight kg 4) 8.7
Power output kW/bhp 1.7 / 2.3
Standard cutting tool AutoCut 46-2